background image

37

Replacement Parts

The following thermostat component parts can be ordered:

Table 15. Replacement Parts

Catalog #

Component

Remarks

12X97

HD display

Thermostat interface

12X99

Mag-Mount

Wall mount for HD display.

15S64

Smart hub

Control base

13X01

Wall plate

Wall plate for Mag-Mount (use is 

optional)

Mobile Applications

i

C

omFort

 

t

hErmostat

 a

pp

 (h

omEoWnEr

)

The free iComfort

®

 Thermostat app is available for use on iPhone

®

, iPad

®

 and 

Android™ devices.

Control cooling/heating temperatures, fan operation, set programs and set Away 

mode for multiple locations.

i

C

omFort

 m

oBilE

 s

Etup

 a

pp

 (i

nstallEr

)

Allows the installer to commission the system and remotely turn the system on and 

off during setup on any iPhone

®

, iPad

®

 and Android™ device.

Apple, the Apple logo, iPhone and iPad are trademarks of Apple Inc. registered in 

the US and other countries.
Android is a trademark of Google Inc. Use of this trademark is subject to Google 

permission.

Notifications (Alert Codes)

These screens provide information on active notifications and previously cleared 

notifications. When selecting either a cleared or active notification a brief description 

and alert code will be displayed. Notifications are categorized by system, indoor 

unit (air handler or furnace), outdoor unit (air conditioner or heat pump), zoning 

control (if installed) and thermostat.

a

lErt

 C

oDE

 t

ypEs

To expand a specification notification to access a more detail description of the 

alert code, press the down arrow to expand the description.

•  Critical alerts are displayed on Home (user) screen, in the Homeowner alert 

button, and in the Installer alert button. Critical means that a service call is 

needed to get the system running.

•  Minor and Moderate alerts are found only in the Installer alert button.
What does minor and moderate mean?
•  Minor is information only, helps Lennox interpret test results, understand 

complicated behavior.

•  Moderate means that the system will likely recover on its own, no action 

necessary.

Communication System: When communication controls are operating in a 

communication system, all jumper and link setting on controls are ignored. Jumpers 

and link setting are treated as defaults and would only be active if the system was 

converted to a non-communicating system.

Summary of Contents for iComfort E30

















































Reviews: