background image

This quick start guide will help you install and use the 
device properly. For further support please visit 

www.furrion.com/support.

 

PRODUCT OVERVIEW

Press to increase the 
temperature set-point

Press to decrease 
temperature set-point

Press to change 
the fan speed

Press once to turn on. 
Press repeatedly to 
select mode

Operation Mode

Fan Speed

Room Temperature or 
Error Code

WHAT’S IN THE BOX

 

 

 

Warranty Manual

 

 

 

Warning Card

 

 

 

Quick Start Guide

 

 

 

Warranty Manual

 

 

 

Warning Card

 

 

 

Quick Start Guide

Thermostat x 1

QSG x 1
Warranty Manual x 1

NOTE: 

Product design and packaging may change without 

notice.

INSTALLATION

WARNING: 

Risk of electric shock. Always verify that the 

electrical power to the circuit has been disconnected 
before performing the installation procedures. 

Thermostat Location

This thermostat is a regulating device which senses the 
room real-time temperature and performs actions to 
maintain the temperature near a desired set-point. For 
accurate temperature control, the following considerations 
should be taken into account:

1. 

Mount the thermostat on an interior wall, approximately 
5 ft. (1.5m) above the floor. Install in a location with good 
air circulation and avoid damp areas. 

2.  Avoid to install the thermostat in areas that are 

exposed to temperature variances, such as direct 
sunlight, near windows and doors, above or below 
supply vents. Do not install the thermostat in locations 
near heat sources like televisions, lamps, or fireplaces. 

Wiring and Mounting the Thermostat

1. 

Rotate the thermostat cover counterclockwise and pull 
out the base plate.

2.  Use the base plate as a template and drill a hole on 

the vehicle wall. Extend the four wire cables from the 
cutout area. Refer to the cable tag label for each cable 
definition. 

3.  Mount the thermostat base on the wall using screws 

included with the thermostat.  

NOTE:

 Make sure the base is not covering the hole and 

squeezing the thermostat cables. Take care in case of 
damaging the temperature sensor.

4.  Connect the cables to thermostat. 
5.  Replace the thermostat to the base and rotate 

clockwise until it snaps into place. 

Thermostat Cables

Thermostat Cables

Thermostat 

cables

2

3

4

5

2

4

3

5

1

STANDARD SINGLE ZONE 
WALL THERMOSTAT

MODEL: FACW10ESSA-BL

QUICK START GUIDE

For further support and to download the air 

conditioner user manual please scan the QR 
code or visit: 

https://furrion.com/pages/

downloads-climate

Reviews: