LENCO RC-8-2 Manual Download Page 9

LCD shown as SUCCESS and back to normal operation. The LCD symbol of "*" 
will be turns ON. 
NOTE : 
?Press the [CH+] or [CH-] key as forward or backward for VOL LOCK and VOL 
UNLOCK. 
?Press the [SET] key to confirm and store the selected status of Volume 
Lock/Unlock. 
?Press the [ESC] key for escape and the selected status will not be stored.  

Press the [SET] key to for 2 seconds 
Press & release the [CH+] key for four (4) times 
Press the [SET] key once 
Press the [CH+] key to select 
Press the [DEVICE] key to select a desired mode,then press the [SET] key  

DEVICE SET UP (LOCK/UNLOCK) 
The RC-8-2 provides the device lock or unlock of the remote to avoid the in 
proper use of the children.  
Simply follow below steps: 
1.  Press the [SET] key to for 2 seconds and the LCD will be shown CODE 
SETUP.  
2.  Press & release the [CH+] key for five (5) times to view the DEVICE SET 
page. 
3.  Upon the LCD shown as DEVICE SET, press the [SET] key once.  
4.  The LCD shown as TV DEV UNLOCK or TV DEV LOCK. Press the [Device] 
key to select a desired mode (TV, VCR, SAT or AUD etc...): 
?If you want to have DEVICE in unlock stage. Please press the [CH+] key to view 
TV DEV UNLOCK page then press the [SET] key to confirm and LCD shown as 
SUCCESS and back to normal operation, The LCD symbol of "*" will be turns 
OFF. 
?If you want to have device in lock stage, please press the [CH+] key to view TV 
DEV LOCK and press the [SET] key to confirm and LCD shown as SUCCESS 
and back to normal operation. The LCD symbol of "*" will be turns ON. 
NOTE : 
a)  Press the [CH+] or [CH-] key as forward or backward for DEVICE LOCK and 
DEVICE UNLOCK. 
b)  Press the [SET] key to confirm and store the selected status of Device 
Lock/Unlock. 
c)  Press the [ESC] key for escape and the selected status will not be stored.  

Press the [SET] key to for 2 seconds 
Press & release the [CH+] key for five (5) times 
Press the [SET] key once 
Press the [CH+] key to select 
Press the [DEVICE] key to select a desired mode, then press the [SET] key  

Summary of Contents for RC-8-2














Reviews: