P.8
HOME DEVICE SET UP
The RC-8-2 provides the home device setup to let you easy use of the one
device that you are use mostly. Simply follow below steps:
1. Press the [SET] key to for 2 seconds and the LCD will be shown CODE
SETUP.
2. Press & release the [CH+] key for six (6) times to view the HOME SET page.
3. Upon the LCD shown as HOME SET, press the [SET] key once.
4. The LCD shown as TV HOME DEV, press the [Device] key to select a
desired mode (TV, VCR, SAT or AUD...).
5. Press the [SET] key to confirm and LCD shown as SUCCESS and back to
normal operation..
NOTE :
a) Press the [SET] key to confirm and store the Home Device.
b) Press the [ESC] key for escape and the selected Home Device will not be
changed.
Press the [SET] key to for 2 seconds
Press & release the [CH+] key for six (6) times
Press the [SET] key once
Press the [DEVICE] key to select a desired mode, and then press the [SET] key
once
MARCO1 AND MARCO2 SET UP (Sequence of Commands)
You can program your RC-8-2 to issue a sequence of commands at the press of
one button (either MAC1 or MAC2). For example, you may want to turn off your
TV, VCR, Satellite and HI-FI at the same time. Any sequence of commands you
regularly use can be reduced to one key stroke for your convenience. MAC1 and
MAC2 keys are programmed with a Marco works through all modes (provided it's
accessible in that mode). Simply follow below steps:
Example: To setup a Marco that switches off your
TV, VCR, and SAT on MAC1:
1. Press the [SET] key to for 2 seconds and the LCD will be shown CODE
SETUP.
2. Press & release the [CH+] key for seven (7) times to view the MARCO SET
page.
3. Upon the LCD shown as MARCO SET, press the [SET] key once.
4. The LCD shown as MARCO1. (For MAC2, press the [CH+] to shown as
MARCO2).
5. Press the [SET] key to enter MAC1 operation and the LCD shown as MAC1
KEY-01, press the key in the following sequence:
6. [TV] key for key-01 location, [Power] key for key-02 location.
7. [VCR] key for key-03 location, [Power] key for key-04 location.
8. [SAT] key for key-05 location, [Power] key for key-06 location.
9. To store the MAC1, press the [SET] key to confirm and LCD shown as