LENCO RC-8-2 Manual Download Page 8

 

To delete all learned functions:  
Example : to delete all learned functions within the TV mode : 
1.  Press the [SET] key to for 2 seconds and the LCD will be shown CODE 
SETUP.  
2.  Press & release the [CH+] key for two (2) times to view the LEARN MODE 
page. 
3.  Upon the LCD shown as LEARN MODE, press the [SET] key once. The LCD 
now shown as TV IR LEARN. 
4.  Press the [CH+] key for two (2) times to the page of delete all keys and now 
the LCD shown as TV DELETE ALL. Press the [Device] key to select a desired 
mode (TV, VCR, SAT or AUD, etc...). In this case is [TV] key. (** Press the [CH-] 
key two (2) times, it did backward to TV IR LEARN page.) 
5.  Press the [SET] key once and the RC-8-2 LCD shown as SUCCESS now 
performed all the deleting process. The LCD of RC-8-2 will be shown as normal 
operation to show the status of device, weekday, and clock time.  

Press the [SET] key to for 2 seconds 
Press & release the [CH+] key for two (2) times 
Press the [SET] key once 
Press the [CH+] key for two (2) times. 
Press the [DEVICE] key to select a desired mode, and then press the [SET] key 
once   

P.7 
PUNCH THROUGH OF VOLUME SET UP (LOCK/UNLOCK) 
The RC-8-2 provides the volume lock (enable) or unlock (disable) as the Punch 
Through function of the remote. It allows you to operate TV's VOLUME and 
MUTE function simultaneously without having to switch the device modes 
repeatedly. You can adjust the TV sound source while you are operating the VCR, 
Satellite Receiver, or Audio equipment. Right at your finger tips. 
Simply follow below steps: (only available in VCR, SAT or AUD) 
1.  Press the [SET] key to for 2 seconds and the LCD will be shown CODE 
SETUP.  
2.  Press & release the [CH+] key for four (4) times to view the VOLUME SET 
page. 
3.  Upon the LCD shown as VOLUME SET, press the [SET] key once.  
4.  The LCD shown as VCR VOL UNLOCK or VCR VOL LOCK, Press the 
[Device] key to select a desired mode (VCR, SAT or AUD, etc...) 
?If you want to have volume in unlock stage (Punch through disable). Please 
press the [CH+] key to view VCR VOL UNLOCK page, then press the [SET] key 
to confirm and LCD shown as SUCCESS and back to normal operation, The LCD 
symbol of "*" will be turns OFF. 
?If you want to have volume in lock stage (Punch through enable), please press 
the [CH+] key to view VCR   VOL LOCK and press the [SET] key to confirm and 

Summary of Contents for RC-8-2














Reviews: