SUCCESS and back to normal operation, or press the [MAC1] or [MAC2] key for
escape and the selected macro keys will not be stored.
NOTE :
a). Press the [SET] key to save the selected Marco keys during the Marco
sequence.
b). After 15th key in sequence, all selected Marco keys will be stored and back
to normal operation mode automatically.
c). Press the [M1] or [M2] key for escape and the selected Marco keys will not
be stored.
d). Each Marco can consist of a maximum of 15 key strokes.
e). Upon changing the batteries, your Marcos will be retained.
f). You can replace a Marco by placing another Marco on top.
Press the [SET] key to for 2 seconds
Press & release the [CH+] key for seven (7) times
Press the [SET] key once
Press the [SET] key to enter MAC1 operation
To store the MAC1, press the [SET] key to confirm
P.9
RESET ALL SET UP
The RC-8-2 provides the reset all setup to let you back to the internal setup to
the factory default setting. Simply follow below steps:
1. Press the [SET] key to for 2 seconds and the LCD will be shown CODE
SETUP.
2. Press & release the [CH+] key for eight (8) times to view the RESET ALL
page.
3. Upon the LCD shown as RESET ALL, press the [SET] key once.
4. The LCD shown as CONFIRM, press the [SET] key to confirm and the
RC-8-2 will back to initial reset.
NOTE :
Press the [ESC] key for escape and back to normal operation mode.
Press the [SET] key to for 2 seconds
Press & release the [CH+] key for eight (8) times
Press the [SET] key once
Press the [SET] key to confirm
RETAIN OF MEMORY
Upon changing the batteries or you are not on time to replace new batteries for
RC-8-2, all your setting for devices code number, learned functions, marco
functions, etc...will be retained. You need not to worry about to start all over again
for setup (Except the Weekly, Hour, and Minute, these are all required to set up
again after you placed the new batteries on the RC-8-2).