LENCO RC-8-2 Manual Download Page 2

 

The IR Indicator will blink when keys are pressed both during normal use and in 
programming mode. 
Device 
Weekday 
Hour & Minute 
Scoll  
Up/Down 
Indicator 
Marco 1 
Marco 2 
Device 
Lock 
Volume 
Lock 
LCD  
SHOWN   

P.2 
Thank you for purchasing the RC-8-2 preprogrammed and learning universal 
remote control. Before you can use your new remote, you will need this manual 
to set up your new RC-8-2 to operate the specific A/V home entertainment and 
any infrared transmission equipment you wish to control. 
CONTROLS UP TO 8 DEVICES 
Your RC-8-2 is designed to let you use one remote to operate your Audio and 
Video equipment; any device designed to be operated by an infrared signal. Your 
RC-8-2 comes with wide range transmitter for maximum range and is capable for 
High Frequency Signal. You can choose any combination of eight devices you 
would like to operate. 
LEARNING FEATURE 
The RC-8-2 comes equipped with the unique "learning feature" (next to the 
regular Set Up), which means that you can copy almost any function from your 
original remote control onto your new RC-8-2. This comes in handy, when after 
having setup your RC-8-2 you may find some functions from your original remote 
missing on your RC-8-2 keypad. 
MARCOS (SEQUENCE OF COMMANDS) 
Your RC-8-2 comes with an easy-to-use Marco feature ([MAC1] and [MAC2]), 
allowing you to send several commands with the press of a single key (for 
example turning all your home theatre devices ON or OFF). 
BATTERY INSTALLATION / CHANGE 
1.  On the back of the RC-8-2, pull the battery compartment cover. 
2.  Insert two (2) AAA new Alkaline batteries. 
3.  Match the batteries to the (+) and (-) marks inside the battery compartment.  
4.  Close the battery compartment. 
CLOCK SET UP 

Summary of Contents for RC-8-2














Reviews: