Detaching the implement
66
10
DETACHING THE IMPLEMENT
Lower the implement before detaching it.
Move the tractor's three-point linkage to
the float position to depressurise the hy-
draulic hoses.
Activate the tractor linkage until there is
no load on the top link pin (7).
Release the top link pin (7) and remove
it.
Remove the top link (5) from the head-
stock (6) and place it in the bracket pro-
vided on the tractor.
Release the safety device (4) and re-
move the lower link (2) from the pivot on
the cross shaft (3). See also the tractor
manufacturer's operating instructions.
Drive the tractor approx. 20 to 30 cm
away from the implement.
Secure the tractor so that it does not roll
away.
Disconnect the electrical cables.
Disconnect the hydraulic hoses and
push on the protecting caps.
Carefully drive the tractor away from the
implement.
4
2
3
7
5
6