Preparation of the Tractor
36
6.6 Three-point
connection
DANGER
Risk of fatal injury if the three-point connection category is
too small
If the category of the cross shaft or top link pin that is employed is
too small, these components can be overloaded and may break.
As a result, the implement may drop and people in the immediate
vicinity may be injured or killed.
The implement may also be damaged.
This may cause death or injury to other road users while the im-
plement is being transported.
Always ensure that the category of the cross shaft and top link
pin corresponds to the tractor power in accordance with
ISO 730-1.
WARNING
Loss of the implement
The category of the three-point linkage on the tractor and the cat-
egory of the cross shaft and top link pin must correspond, other-
wise the cross shaft and top link pin may slip out of the connection
when travelling on uneven ground or as a result of vibration.
Always ensure that the category of the three-point connection
and the diameter of the cross shaft and top link pin are exactly
the same.
