Attaching the implement
41
Connect the electrical cables to the trac-
tor. See »Power sources required, page
34«.
Now reverse right up to the implement
and connect the lower links (2) of the
tractor to the cross shaft (3).
Secure the cross shaft (3) with the safety
device (4). See also the tractor manufac-
turer's operating instructions.
Connect the top link (5) with the head-
stock (6) using the top link pin (7).
The top link position also pre-sets the pressure on the rollers and
therefore the degree of soil crumbling and reconsolidation. See
»Pressure load on the rollers, page 62«.
Secure the top link pin (7) with a linch
pin.
4
3
7
6
8
