Lektri-Co SVIK, User And Installation Manual

Page: 32 / 36

SVIK user and installation manual 32
8. MAINTENANCE AND SUPPORT
8.1. MAINTENANCE
Although the SVIK charger was designed to function without
maintenance, it is recommended to periodically check the charger’s
condition.
CAUTION
Always turn off the power supply of the charger before
checking the charger’s condition.
SVIK’s condition checklist:
• check the plastic enclosure for damages (cracks, defects or other
imperfections);
• check that the electrical insulation of the included charging cable is
intact;
• check that the housing of the type 2 connector is intact;
• check that the type 2 connector’s pins are not bent, oxidized and free
of any debris (e.g. dust, dirt);
• check that there is no water trapped inside the connector pin’s
rubber protection cover;
CAUTION
If defects are found, stop using the charger
immediately and contact the manufacturer or
the local supplier.
INFORMATION
To avoid damages to the charging cable and
type 2 connector, when not in use, wrap the
charging cable around the charger.
Whenever it is necessary use a dry cloth to remove any dust, dirt or water
droplets from the charger’s plastic enclosure. Do not use any cleaning
solvents or water to clean the SVIK charger.