Lektri-Co 1P7K, User And Installation Manual

Page: 13 / 42

1P7K user and installation manual 13
4.1. NECESSARY TOOLS
To properly install the 1P7K charger, the following tools are required:
Hammer Drill machine Drill bits Step drill bit Screwdrivers
Measuring
tape
Marker/pencil Cable
cutting plier
Cable
stripping
plier
Utility knife
4.2. PLAN THE INSTALLATION
Before starting the installation, the following recommendations must be taken
into consideration:
• make sure the charger can be installed vertically, on a sturdy and fire-
resistant wall or on the optional metal pillar that can be purchased
separately;
• make sure there is enough space to install the charger (see chapter 4.5
Overall and mounting dimensions and Fig. 14 Free area around the 1P7K
charger when installed on a wall);
• make sure that the IP54 protection class of the charger can be maintained
(protected against dust and water splashes).
4. 1P7K INSTALLATION
Before starting to install and operate the 1P7K charger,
the user must always read this document very carefully,
take into consideration all the warnings and follow all the
instructions as described in this manual.
CAUTION