Lektri-Co 1P7K, User And Installation Manual

Page: 28 / 42

1P7K user and installation manual 28
6. 1P7K CHARGER CONFIGURATION
To configure the 1P7K charger use the dedicated LEKTRI.CO app.
The following parameters can be configured:
1. Alias .
Give your charger an alias name (nickname) to easily identify it in the
dashboard. Tip: even use Emojis!
2. Load Balancing Mode .
Menu to set and manage the Power Management device and Load
Balancing Mode.
3. Plug and Charge.
Enable this to directly start charging when plugged into a car.
Disable to require authentication via App, API, Cloud or OCPP before
starting a charing process.
4. Access Point (direct) WiFi password.
The WiFi access point (hotspot) of the charger is not secured by default.
Set a password if you would like to restrict access to the charger, when it
is not connected to another WiFi network.
5. LED brightness.
The brightness of the LEDs may be reduced with this setting.
6. Max current.
The maximum current your charger should charge with.
This value should only be set by an authorized electrician,
according to the electrical installation.
7. Firmware update.
The device automatically checks for updates, but may also be updated
manually here.
8. Factory reset.
Resets the charger to its factory setting and wipes an user data.
9. OPCC server.
Option to connect to an OCPP server for remote management.
10. Restart device.
CAUTION