Lektri-Co 1P7K, User And Installation Manual

Page: 17 / 42

1P7K user and installation manual 17
plastic enclosure. These easy to cut areas are used to insert the power
supply cable into the main body of the charger.
There are 2 available easy to cut areas through which the power supply
cable can be inserted into the charger. One area is on the rear of the
enclosure and one area is on the bottom left side.
8. If the rear cut-out area is used, insert the provided sealing cap in the cut-
out hole. Insert the power supply cable through the sealing cap, to ensure
water tightness. If the bottom left cut-out hole is used skip this step.
9. Fix the main body of the charger on the wall by inserting the screws with
the provided rubber sealing washer through the mounting points and
tighten them with a screwdriver by hand.
Fig. 5 Cut out areas for the power supply cable