Lektri-Co 1P7K, User And Installation Manual

Page: 30 / 42

1P7K user and installation manual 30
Installation
The magnetic core current clamp will be installed on the live cable after the
utility meter so that all electricity consumption/production goes through it.
At the bottom of the magnetic core current clamp, you will see an arrow
showing you the direction of current/voltage flow to follow when installing. This
should point from the grid to your home.
Ensure the power clamp is on the same phase/circuit as the charger you want
to connect.
Follow this diagram to connect your device.
WiFi connection
After installation and startup, the device will create a WiFi hotspot. Connect to
this WiFi network using your smartphone, tablet or PC. After connecting to the
network, “Sign in to”
WiFi Network” (Connecting to the WiFi network). In this case, click the
notification.
If the login notification does not appear, please open an Internet browser and
access the following address: http://192.168.4.1.
Select the desired WiFi network to connect the device, enter the password and
press connect. After successfully connecting to the network, the device’s IP
will be visible at the top right of the page by swiping above the WiFi symbol or
at the bottom of the page. This IP address is required to access the device’s
user interface after reconnecting to the WiFi network.