Lektri-Co 1P7K, User And Installation Manual

Page: 36 / 42

1P7K user and installation manual 36
9. MAINTENANCE AND SUPPORT
9.1. MAINTENANCE
Although the 1P7K charger was designed to function without maintenance, it is
recommended to periodically check the charger’s condition.
CAUTION
Always turn off the power supply of the charger before
checking the charger’s condition.
1P7K’s condition checklist:
• check the plastic enclosure for damages (cracks, defects or other
imperfections);
• check that the electrical insulation of the included charging cable is intact;
• check that the housing of the type 2 connector is intact;
• check that the type 2 connector’s pins are not bent, oxidized and free of
any debris (e.g. dust, dirt);
• check that there is no water trapped inside the connector pin’s rubber
protection cover;
CAUTION
If defects are found, stop using the charger
immediately and contact the manufacturer or the
local supplier.
INFORMATION
To avoid damages to the charging cable and type
2 connector, when not in use, wrap the charging
cable around the charger.
Whenever it is necessary use a dry cloth to remove any dust, dirt or water
droplets from the charger’s plastic enclosure. Do not use any cleaning solvents
or water to clean the 1P7K charger.