A
A
D
D
E
E
L
L
s
s
y
y
s
s
t
t
e
e
m
m
Instruction Manual
ADEL system srl
Via L. Barchi 9/B, 42100 Reggio Emilia (Italy) – Tel. ++39-0522-345518
Fax. ++39-0522-345551 – Internet: www.adelsystem.com – e-mail: [email protected]
CBI123A_R8 Eng.doc
CBI123A – CBI123A/S – CBI123ARJ
Intelligent Battery Charger
Thank you for having chosen one of our products for your work. We are certain that it will give the utmost satisfaction and be a notable
help on the job.
General Description:
Application
CBI battery charger is a range of microprocessor-power supplies witch correctly charge sealed lead-acid batteries at all time
maximizing performance and life span.
Charge the battery in multi-stage principle, Fast and Trickle and automatically the device, check the battery efficiency in a lifetime to
prevent any risk of damage to the battery and allow leaving the charger permanently connected. Before begin the operations of
installation consult the manual.
Mains Characteristic
•
Nominal Input Voltage: 115 - 230 Vac
•
OUTPUT 1: for connection to Battery
•
OUTPUT 2: for connection to Load
•
Fast and trickle battery charge In according to DIN 41773
•
Signaling: replace battery, low battery, mains or buffering
•
Overload and short circuit protections
•
Safety isolation in according with EN 60950
•
Output 12 Vdc 6 A 50° C also without mains
•
Degree of protection IP20
•
Rail DIN mounting
Vac Input
Mains or
Backup
OUTPUT N°2
Load Vdc Output
Charging Level
OUTPUT N°1
Battery module
Low Battery or
Battery replacement
Battery Type
Configuration Jumper
Monitor Led
Auxiliary
Output
(CBIXXX/ARJ)
