12
Instruction Manual V 1.6 – 11/2007
4.2
Unpacking and installing the instrument
If at all possible the instrument should be installed on a low-vi-
bration workbench surface.
Unpacking the instrument:
-
Open the transport box and carefully remove all the parts from the
box.
-
Compare with the attached pack list to make sure the delivery is com-
plete.
-
Connect the drain tube (Fig. 13.1) of the cooling bath at the underside
of the instrument
(1).
-
Ensure that the loose end of the drain tube is closed tightly with the
matching stopper.
-
Secure the loose end of the drain tube in the holder at the rear of the
instrument
(2)
.
Mounting the magnifier:
-
The magnifier carrier is packed separately.
-
Attach it to the instrument as shown in Fig. 11.2.
-
Connecting the optional foot switch:
-
Plug in the foot-switch into the 9-channel plug
(3)
at the rear of the
instrument.
4.
Installation
Fig. 12.1
1
2
Fig. 12.2
3
