40
FNC Key
Leica TPS800-4.0.0en
Delete Last Record
This function deletes the last recorded data block.
This can be either a measurement block or a code
block.
)
Deleting the last record is
not reversible
!
)
Only records can be deleted which were
recorded in "Surveying" or in "Measuring".
Lock with PIN
This function is used to prevent
unauthorized use
of the instrument. It enables you to lock the instru-
ment from any application by pressing [FNC] > [Lock
with PIN] without switching off the instrument. After
that the instrument will prompt for a PIN code entry.
The function is available when the PIN protection is
activated under [MENU] > [PIN].
Check Tie
Calculation and display of the slope and horizontal
distance, height difference, azimuth, grade, and co-
ordinate differences between the last two measured
points. Valid distance measurements are required
for the calculation.
Important Messages
Less than two valid measurements!
Meaning
The values cannot be calculated as there exist less
than 2 valid measurements.
TPS800_Z79
Azi
N
