131
Programs
Leica TPS800-4.0.0en
Coding
Codes contain information about recorded points.
With the help of coding, points can be assigned to a
particular group simplifying later processing.
More information on coding can be found under
"Data management".
GSI-coding
Code: Code name
Desc.: Additional remark
Info1: more, freely editable
...
information
Info8: lines
)
Codes are always stored as free codes
(WI41-49), that means that codes are not directly
linked to a point. They are stored before or after the
measurement depending on the setting made. Point
codes (WI71-79) are not available.
Procedure:
1
Select code from a codelist or enter new code.
[RECORD] The code is directly recorded
without a measurement with [ALL].
[OK]
The code is set. After a measure-
ment with [ALL] the code is
recorded.
[AddList]
Adds the entered code to the
codelist.
Extending / editing code
1. Call available code from code list.
2. Attributes can be overwritten freely.
Exceptions:
With the codelist editor of LGO a status can be
assigned to the attributes.
•
Attributes with "fixed status" (see LGO) are
write-protected. They cannot be overwritten or
edited.
•
For attributes with status "Mandatory" an input
or a confirmation is required.
•
Attributes with status "Normal" can be edited
freely.
