126
Programs
Leica TPS800-4.0.0en
Warnings / Messages
Important messages
Meaning
Memory is almost full. Continue?
This message occurs if less than 10% of the memory is free. It is not recom-
mended to start a traverse if the memory is almost full. If you do so, it may
happen in the end that the traverse measurements and the results cannot be
saved.
Current job contains an adjusted
traverse. Select a different job.
Only one traverse per job is allowed. You must select another job.
Last traverse not yet finished or
processed - continue?
The TraversePRO program was quit without closing a traverse. You can
continue the traverse on a new station. You can leave the traverse unfin-
ished. Or you can start a new traverse and the old traverse data is over-
written.
Do you really want to start a new
traverse? All existing traverse data will
be overwritten.
You can go back to the previous panel and decide again.
REDO last station? Measurements on
this station will be overwritten.
Other options are to quit TraversePRO completely or to go back to the
TRAVERSE MAIN panel and decide again.
QUIT Traverse Application? Current
Station data will be lost.
You can either quit the application or go back to the previous panel and select
another option.
Tolerances exceeded. Accept?
If you do not accept, the calculations can be redone.
