Leica OH4, Service Manual, Page: 235 / 264

General safety measures
5 Leica M525 OH4 / Ref. 10 714 368 / Version A
Inward-goods inspection
Damaged goods reduce the safety level.
The use of damaged products can cause severe injury.
Check the packaging and goods for transport damage:
• The transport container should be undamaged.
• The delivery as listed in the order folder should be complete.
• The optional accessories as listed in the order folder should
be complete.
• The user manual should be present.
• All of the components shown in the configuration diagram
should be present.
If damage has occurred, have the safety of the goods inspected
by the Leica service workshop before using them.
Safety precautions in these assembly
instructions
Caution
Damage to microscope if the screws are tightened
excessively!
➩
Avoid the use of excessive force when tightening all
screws.
➩
Set the torque wrench to the tightening torque
specified. Apply the wrench until this tightening torque
is reached (signaled by a clicking noise). Do not
tighten further.
Warning
Risk of severe personal injury when the stand moves in
an uncontrolled manner!
➩
Lock the footbrakes during the mounting process.
Caution
Microscope can be damaged by jammed cable!
➩
Ensure that no cable is jammed between the cover
and the microscope carrier.
Caution
Risk of injury by falling wheel counterweight or cover!
➩
During the change, ensure that your feet are not under
the wheel counterweight or the cover.
Warning
Risk of injury by movements of the microscope during
balancing out!
➩
Ensure that no one is in the direct vicinity of the
microscope while balancing it out.