Leica OH4, Service Manual, Page: 178 / 264

Preparation for operation
36 Leica M525 OH4 / Ref. 10 714 367 / Version -
Transport, transporting and rest
positions
Warning 6
Danger of injury due to:
• Uncontrolled lateral movement of the swing arm!
• Tilting of the stand!
• Feet in lightweight shoes could become trapped
beneath the casing of the base.
➩
For transportation, always move the Leica M525 OH4
surgical microscope into the transport position.
➩
Never move the stand in the extended condition.
➩
Never roll over cables lying on the floor.
➩
Always push the Leica M525 OH4 surgical microscope
- never pull it.
Caution 2
Surgical microscope can move without warning!
➩
Always lock the footbrake when you are not moving
the system.
Transport position
Always move your Leica M525 OH4 into the transport position
before transporting it.
Caution 3
Damage to the Leica M525 OH4 surgical microscope
due to uncontrolled tilting!
➩
Hold the CAN handle when releasing the brake.
Caution 4
Damage to the Leica M525 surgical microscope during
transportation!
➩
Never move the stand in the extended condition.
➩
Never roll over cables lying on the floor.
➩
Press the "All Brakes" button and move the Leica M525 OH4
into the transport position (see illustration below).
Make sure that the video monitor does not collide with
the horizontal arm and the vertical arm of the stand.
➩
Unplug and secure the power cable.
➩
Release the footbrake.
➩
Depress the footbrake at the front end (FREE).
The footbrake disengages and is released.
➩
Move the Leica M525 OH4 using the handle.
Rest position
Bring the microscope into rest position after use.
➩
Push the microscope in the transport position to its storage
location.
➩
Depress the footbrake at the rear end (LOCK) until it engages.
➩
Pull the protective cover over the Leica M525 OH4.