Leica M 10, Instructions Manual

Page: 175 / 229

EN
171
Pictur
e mode
B� With thumbwheel ‘programmed’ accordingly
1. Select the menu item
Customize Control
,
2. in the sub-menu
Customize Wheel
,
3. in the respective sub-menu
Exp. Compensation
, and
4. confirm the function by pressing the Center button
30
.
5. Use the thumbwheel
28
to select the desired value.
C� Using the menu
1. Select the menu item
Exp. Compensation
.
• The monitor shows a scale as a sub-menu:
A
Set compensation value (mark at
O
= switched off)
2. Set the desired value.
Displays
– In cases A and B, the compensation value is displayed in the
viewfinder, for example
1.0-
/
0.3
(temporary display instead of
the shutter speed). Then in the form of changed shutter speeds
and a flashing dot at the bottom in the viewfinder, or for about
0.5s when the display is activated.
– Regardless of the setting method, the value is displayed in the
monitor in Live View mode and in the Information screen if the
viewfinder is being used by means of a mark in the lower part of
the light balance, and in the output menu list by means of
EV+_
X
1
.
Important:
An exposure compensation set on the camera only influences
metering of the available light, i.e. not flash light (for more informa-
tion about flash photography, refer to the sections starting on p.
182).
Regardless of how the set compensation was originally entered:
– It remains effective until it is manually reset to
0
, regardless of
whether the camera has been turned off and back on in the
meantime.
– It can be reset using either the menu or the thumbwheel.
1
Example, either plus or minus, " ± X " stands for the respective value
A