Leica L5 FL
16
Lamp:
Installation,
replacement
Please ensure that lamp and lamp mount are
cooled off before replacing them.
A corresponding warning label is attached as a
reminder.
Switch off the light source.
Open the lamp housing (10) by pressing the
release button (11) and pull it out to the stop
(Fig. 1).
Press both levers of the special socket down
and pull out the defective bulb.
The two levers must also be pressed down
when the new bulb is inserted.
Insert the lamp housing to the stop
(you should hear it engage).
Switch on the light source.
Fig. 1
Halogen bulb in mount
Fig. 2
Lamp mount for halogen lamp
Fig. 3
2 sockets for halogen lamp
Assembly
