Leica GPS1200+, Technical Reference Manual, Page: 593 / 1442

Configuration of Devices 593
Next step
CONFIGURE
GSM/Modem AT
Command Lines For <GPRS/Internet: Yes> in CONFIGURE New Device , this screen consists of two pages:
The following table lists the fields of both pages.
<Flow
Control:> None or RTS/CTS Activates hardware handshake.
When the receiver/device is ready for data, it asserts
the
R eady T o S end line indicating it is ready to
receive data. This is read by the sender at the C lear
T o S end input, indicating it is clear to send the data.
IF the device is a THEN
radio or device other
than digital cellular
phone or modem STORE (F1) to close the screen and to return to the screen from
where CONFIGURE New Device was accessed.
digital cellular phone
or modem ATCMD (F4) . Refer to paragraph "CONFIGURE GSM/Modem AT
Command Lines".
Field Option Description
GSM/CSD page: The AT commands configure the devices for normal digital cellular
phone/modem mode.
GPRS/Internet page The AT commands configure the devices for GPRS/Internet mode.
Please refer to the manual of the GPRS / Internet device for informa-
tion about which AT commands need to be entered or contact the
supplier.