Leica GPS1200+, Technical Reference Manual

Page: 209 / 1442

Manage...\Data 209
9.6.2 Point, Line and Area Code Filter
)
For each object, a code filter exists. The point, line and area code filters are independent
from each other. The functionality is identical. For simplicity, the point code filter is explained.
Access step-by-step
MANAGE
Point Code Filter This screen shows the point codes from the active job and codes currently used as filter.
Point codes are sorted according to the settings in
MANAGE Sort Codes .
Step Description
1. Refer to "9.6.1 Sorting and Filters for Points, Lines and Areas" to access MANAGE
Sorts & Filters .
2. Select <Filter: Point Code> .
3. CODES (F4) to access MANAGE Point Code Filter .
CONT (F1)
To close the screen and return to the screen
from where this screen was accessed.
GROUP (F4)
To activate and deactivate code groups.
Accesses
MANAGE Code Groups . Any code
group that have been previously deactivated
are displayed as deactivated here. Codes
belonging to a deactivated code group are not
displayed in
MANAGE Code Filter . Refer to
"10.6 Managing Code Groups".