Leica GPS1200+, Technical Reference Manual

Page: 297 / 1442

Manage...\Coordinate Systems 297
13.5.2 Creating a New Transformation
)
Classic 3D transformations can be created.
Access Refer to "13.5.1 Accessing Transformation Management" to access MANAGE Transforma-
tions .
Create a transformation
step-by-step The following table explains the most common settings. Refer to the stated chapter for more
information on screens.
Step Description Refer to
chapter
1. In MANAGE Transformations highlight a transformation. A copy of
this transformation is taken for further configurations.
2. NEW (F2) to access MANAGE New Transformation .
3. MANAGE New Transformation , General page
<Name:> A unique name for the new transformation. The name may
be up to 16 characters long and may include spaces.
<Type:> Output field. No other transformations than Classic 3D can
be created.
39.1
Enter a name.
4. PAGE (F6) changes to the Parameters page.
5. MANAGE New Transformation , Parameters page
Enter the known values of the transformation parameters.
6. PAGE (F6) changes to the More page.