manualshive.com logo in svg

Leica GPS1200+, Technical Reference Manual, Page: 3 / 1442

Share
Download
Leica GPS1200+ Technical Reference Manual Download Page 3

Introduction

3

Validity of this manual

• This manual applies to all instruments. Differences between the various 

models are marked and described.

• The RX1200 is available as RX1210 or with touch screen functionality as RX1210T, 

RX1250X, RX1250Xc, RX1250T or RX1250Tc. The name RX1210 is used throughout 
the manual and may also represent the touch screen models. Only use the supplied 
stylus on the screens of the touch screen models.

Illustrations

For the purpose of the illustrations, a model has been selected which is represent-
ative for all models.

Available
documentation

Name

Description

Format

User Manual

All instructions required in order to operate the 
product to a basic level are contained in the 
User Manual. Provides an overview of the 
product together with technical data and safety 
directions.

X

X

Summary of Contents for GPS1200+



































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments