Leica GPS1200+, Technical Reference Manual, Page: 176 / 1442

Manage...\Data 176
7. PAGE (F6) changes to the Code page.
8. MANAGE Edit Point: Point ID , Code page 11.2 and
11.3
The point code can be edited. All point codes in the job can be
selected.
The description of the code is shown as an output field.
The attributes are shown as output, input or choicelist fields
depending on their definition.
The attribute values shown depend on
<Attributes:> in
CONFIGURE Coding & Linework . <Attributes: Last Used> shows
the last used attribute values which are stored for this point code in
the active codelist.
<Attributes: Default Values> shows the default
attribute values for this point code if existing.
)
NEW-A (F2) allows additional attributes to be created for this point
code.
)
NAME (F3) or VALUE (F3)
Available for attributes for which an attribute name can be typed in.
To highlight
<Attribute n:> or the field for the attribute value. The
name of <Attribute n:> can be edited and an attribute value can be
typed in.
)
LAST (F4) recalls the last used attribute values which were stored
with this point code.
Step Description Refer to
chapter