Leica GPS1200+, Technical Reference Manual, Page: 1314 / 1442

Survey Cross Section 1314
48.6 Working Example
Description
Diagram
Requirements • A real-time reference is running.
• For the rover:
<R-Time Mode: Rover> in CONFIGURE Real-Time Mode .
• A codelist containing the codes TB1, BB1, BB2, EB1, CL, EB2, BB3, BB4 and TB2 has
been created in LGO and loaded onto the receiver.
Application: Surveying a road, taking the same cross sections at particular
intervals.
Working technique: Real-time kinematic.
Goal: The points of each cross section are to be picked up.
Codes are assigned automatically. The codes are shown in the
diagram.
Each new cross section is started at the same end as where the
previous cross section finished.
a) Top of bank 1, TB1
b) Bottom of bank 1, BB1
c) Bottom of bank 2, BB2
d) Edge of bitumen 1, EB1
e) Center line, CL
f) Edge of bitumen 2, EB2
g) Bottom of bank 3, BB3
h) Bottom of bank 4, BB4
i) Top of bank 2, TB2
a
b c g h
i
d
e
f
GPS12_167