Leica GPS1200+, Technical Reference Manual, Page: 1225 / 1442

Survey - Auto Points 1225
Stop & Go An auto point is stored when the position of the
antenna does not move more than the distance
configured in
<Stop Position:> within the <Stop
Time:> .
Once a point has been stored, the position from the
point just stored must change more than the distance
configured in
<Stop Position:> before the routine
starts again.
User Decides An auto point is stored upon pressing OCUPY (F3) in
SURVEY Survey: Job Name , Auto page. In the
beginning, the chain to which the auto points should
be assigned must be started with
START (F1) . In the
end, the chain must be closed with STOP (F1) .
<Log Every:> Available unless <Log By: Dist or Ht> .
User input For <Log By: Distance> and <Log By: Height Diff> .
The difference in distance or height before the next
auto point is logged.
For <Log By:
Time> from 0.05s
to 60.0s
For <Log By: Time> . The time interval before the
next auto point is logged.
<Min
Distance:> User input Available for <Log By: Dist or Ht> . The value for the
difference in distance before the next auto point is
logged.
Field Option Description