Leibinger JET3 User Manual Download Page 65

Page: 65 / 233

Gruppe 6

Bedienung – Einstellungen und Funktionen

Seite 65

Release R1.03e

LEIBINGER JET3

6.6.2 Interval operation (integrated clock timer)

The device has to be connected to the mains supply.

The device turns on automatically irrespectively of the ambient
conditions!

The integrated interval function activates the LEIBINGER JET3 automatically in the

on-state according to the times which have been set under the option

<Interval>

(“Settings

Basic Settings

Interval“).

The circulation of the ink prevents a drying up of ink and accumulation of ink

components. The viscosity of the ink is constant.

You will find further information regarding setting of interval times in the

Chapter

Set Interval Operation

Summary of Contents for JET3










































































































































































































































Search results

Summary of Contents for JET3

Reviews:

Related manuals for JET3

Brands by name

Popular brands

Leibinger JET3, User Manual

Search results

Summary of Contents for JET3

Reviews:

Related manuals for JET3

Brands by name

Popular brands