Group 8
Job editor
Page 199
Release R1.03e
LEIBINGER JET3
8.7.3.1.8 Counting direction
This setting controls the direction of the counting process.
Counting direction forward:
If this control box is activated the counter will be
incremented (+).
Counting direction backwards:
If this control box is activated, the counter will be
decremented (-).
8.7.3.1.9 End value control
(Loop/Stop after end value)
The setting controls the action of the counter by reaching the set end value.
Stop at end value:
If this control box is activated, no more counter is displayed
after the end value has been reached.
Loop after end value:
If this control box is activated the counting process and
the print will be started again from the beginning after the end value has been
reached.
8.7.3.1.10 Counter reset (methods)
With the Pop-up window
<Counter Reset>
you can define the reset method of the
counter.
Figure 122
Counter settings (Reset methods)
manual:
The reset happens manually by the operator in the menu (
Extra
X
Product Counter
X
Reset all Job Counters
Product Counter:
The reset of the job counter happens with the reset of the
production counter.
extern signal:
The reset happens by an external supplied signal (interface X4).
