Leibinger JET3 User Manual Download Page 145

Page: 145 / 233

Group 7

Data/Programming

Page 145

Release R1.03e

LEIBINGER JET3

Attention!

To avoid faulty operation you have to carry out the

calibration carefully!

Proceeding:

Press the button

<Extra>

(1) and the option

<Touch Calibration>

(2).

The calibration window (3) opens.

Now press carefully on the middle of the calibration point 4). Repeat the process
as long as the calibration point moves on the display.

If the settings are calculated an accordring message 5) is displayed on the upper
area of the calibration window. Now press any point on the Touch Display to
accept the settings.

The message

<Touch calibration successfully>

(6) is faded in.

Finally press the button

<OK>

(7) to finish the process.

Summary of Contents for JET3










































































































































































































































Search results

Summary of Contents for JET3

Reviews:

Related manuals for JET3

Brands by name

Popular brands

Leibinger JET3, User Manual

Search results

Summary of Contents for JET3

Reviews:

Related manuals for JET3

Brands by name

Popular brands