Leibinger JET3 User Manual Download Page 96

Page: 96 / 233

Group 7

Data/Programming

Page 96

Release R1.03e

LEIBINGER JET3

7.4.3.4 Piezo test and charge test

You will find further informations in the separate document

Service

manual

7.4.3.5 Jet adjustment

This function provides a support for a required correction of the jet position.

This work must only be carried out by trained personnel or by
Leibinger service technicians!

Required tools and facilities:

Magnifier (Sixfold lens)

Allen key 1,5 mm

Attention!

Do not use a ball head-Allen key because it can cause

damages at the screw heads!

Turn on the JET3 by touching the dark

touch-display

(1) at any position

(Duration of touching approx. 2 sec.)

The

main menu

(2) with the

message <Initialization>

(3) is displayed.

After initialization the device starts automatically with the bleeding of the
system. During the process the

message <Bleeding>

(4) is displayed.

Wait until the bleeding process is finished.

Note:

Do not cancel the bleeding cycle ahead of time!

Press the button

<ServiceFunctions>

(1) and the option

<Printhead>

(2).

or
Press the Icon

<Service>

(7) and the register card

<Printhead>

(8).

The functional area

<Printhead>

(9) in the menu „Hydraulic/ Print head Test“ is

now displayed.

Now turn off the jet monitoring with the button

<Ink-Flow-Sensor active>

(10).

An activated jet monitoring is marked by a …… on the button

Remove the print head cover (11).

Summary of Contents for JET3










































































































































































































































Search results

Summary of Contents for JET3

Reviews:

Related manuals for JET3

Brands by name

Popular brands

Leibinger JET3, User Manual

Search results

Summary of Contents for JET3

Reviews:

Related manuals for JET3

Brands by name

Popular brands