Leibinger JET3 User Manual Download Page 147

Page: 147 / 233

Group 7

Data/Programming

Page 147

Release R1.03e

LEIBINGER JET3

With

the

option

<Info>

(2) you can open the display window “Information“ (3).

The following system information are displayed in the window:

Oscillator frequency of the device (4)

The ink which has been filled in the device (5)

The nominal values and the current actual values of the hydraulic system (6)

The JET3 version number, the serial number of the device and the software
versions (7)

The operation hour counter and information for inspection (8)

The charging voltage curve (9) [if available]

With the button

<Export>

(10) you can save the system information on an external

memory device (e.g. USB-stick).

The button

<Close>

(11) closes the window.

Summary of Contents for JET3










































































































































































































































Search results

Summary of Contents for JET3

Reviews:

Related manuals for JET3

Brands by name

Popular brands

Leibinger JET3, User Manual

Search results

Summary of Contents for JET3

Reviews:

Related manuals for JET3

Brands by name

Popular brands