manualshive.com logo in svg

LEGRAND vaddio 999-99800-100, Complete Manual, Page: 88 / 95

Share
Download
LEGRAND vaddio 999-99800-100 Complete Manual Download Page 88

Compliance and Conformity Statements

FCC Part 15 Compliance

This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15, Subpart B, of the FCC Rules.  These limits are designed to
provide reasonable protection against harmful interference when the equipment is operated
in a commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in a residential area is likely to
cause harmful interference in which case the user will be required to correct the interference at his/her own
expense.

Operation is subject to the following two conditions: (1) This device may not cause interference, and (2)
This device must accept any interference including interference that may cause undesired operation of the
device.

Changes or modifications not expressly approved by Vaddio can affect emission compliance and could
void the user’s authority to operate this equipment.

ICES-003 Compliance

This digital apparatus does not exceed the Class A limits for radio noise
emissions from digital apparatus set out in the Radio Interference Regulations
of the Canadian Department of Communications. 

Le présent appareil numérique n’emet pas de bruits radioélectriques dépassant les limites applicables aux
appareils numériques de la classe A préscrites dans le Règlement sur le brouillage radioélectrique édicté
par le ministère des Communications du Canada.

European Compliance

This product has been evaluated for Electromagnetic Compatibility under the EMC Directive for
Emissions and Immunity and meets the requirements for a Class A digital device.  In a domestic
environment this product may cause radio interference in which case the user may be required to take
adequate measures. 

Testing and Conformity

Compliance testing was performed to the following standards; conformity to each is declared.

Emissions – Class A:

FCC Part 15.107, 15.109 Subpart B Unintentional Radiators

ICES-003, Issue 6, January 2016

Technical Requirements for Information Technology Equipment

KN22: 2008 (CISPR 22: 2006)

Radio Disturbance Characteristics of Information Technology
Equipment

EN 55032: 2015/A11: 2020

Electromagnetic Compatibility of Multimedia Equipment –
Emissions Requirements

83

Complete Manual for the RoboFLIP 30 HDBT In-Ceiling HD PTZ Camera

Summary of Contents for vaddio 999-99800-100
































































































Reviews:

No comments