To define a preset chain:
1. In the Preset Chains area, select Edit. The Preset Chains window opens.
2. Select the chain to edit, if it is not already selected.
3. Select Add Waypoint. A waypoint definition box opens in the Waypoints area.
4. Do one of these things:
o
Open the preset list and select from the available presets.
o
Leave the definition as Custom Waypoint and use the camera controls to set up the shot you want,
then store it as you would store a preset.
5. Repeat steps 3 and 4 until you have added all the desired waypoints.
To run a preset chain:
From the main Camera page or the operator's page, select a preset chain.
To stop a preset chain:
From the main Camera page or with the remote, select any preset or other camera movement.
31
Complete Manual for the RoboFLIP 30 HDBT In-Ceiling HD PTZ Camera