camera tilt
Moves the camera vertically.
Synopsis
camera tilt{ up [<speed>] | down [<speed>] | stop | get | set}
Options
up
Moves the camera up.
down
Moves the camera down.
speed
<1 – 20>
Optional: Specifies the tilt speed as an integer
(1 to 20). Default speed is 10.
stop
Stops the camera's vertical movement.
set
<position>
Sets the camera's absolute tilt position in
degrees, as a floating point value between
approximately -95.00 and 0.00.
If the value is out of range, the camera returns
an error message and no motion occurs. The
speed parameter may be used with the
camera
tilt set
command.
The
camera tilt set
command blocks
execution of subsequent commands until the
camera reaches the specified position.
get
Returns the camera's absolute tilt position in
degrees, as a floating point value.
Examples
>
camera tilt up
OK
>
Tilts the camera up at the default speed.
>
camera tilt stop
OK
>
Stops the camera's vertical motion.
>
camera tilt set -5 5
OK
>
Tilts the camera 5° down from level at a speed of 5.
50
Complete Manual for the RoboFLIP 30 HDBT In-Ceiling HD PTZ Camera