LEGRAND PDU, User Manual, Page: 336 / 505

Ju
ne
20
18
336 Legrand PDU User Guide
config:# security roleBasedAccessControl ipv4 rule modify <rule_number>
startIpAddress <start_ip> endIpAddress <end_ip> role <role> policy <policy>

IPv6 commands

Modify a rule's IPv6 address range:
config:# security roleBasedAccessControl ipv6 rule modify <rule_number>
startIpAddress <start_ip> endIpAddress <end_ip>

Modify an IPv6 rule's role:
config:# security roleBasedAccessControl ipv6 rule modify <rule_number> role <role>

Modify an IPv6 rule's policy:
config:# security roleBasedAccessControl ipv6 rule modify <rule_number> policy
<policy>

Modify all contents of an existing IPv6 rule:
config:# security roleBasedAccessControl ipv6 rule modify <rule_number>
startIpAddress <start_ip> endIpAddress <end_ip> role <role> policy <policy>
Variables:

<rule_number> is the number of the existing rule that you want to modify.

<start_ip> is the starting IP address.

<end_ip> is the ending IP address.

<role> is one of the existing roles.

<policy> is one of the options:
allow
or
deny
.
Policy Description
allow Accepts traffic from the specified IP address
range when the user is a member of the specified
role
deny Drops traffic from the specified IP address range
when the user is a member of the specified role
Deleting a Role-Based Access Control Rule
These commands remove a specific rule from the list.
 IPv4 commands
config:# security roleBasedAccessControl ipv4 rule delete <rule_number>
 IPv6 commands