Ju
ne
20
18
Legrand PDU User Guide 169
You can select any existing rule and then click
or
to change its priority.
6. Click Save. The rules are applied.
To configure IPv6 access control rules:
1. On the same page, select the "Enable Role Based Access Control for IPv6" checkbox to enable IPv6
access control rules.
2. Follow the same procedure as the above IPv4 rule setup to create IPv6 rules.
3.
Make sure you click the Save button in the IPv6 section
, or the changes made to IPv6 rules are not
saved.
Editing or Deleting Role Based Access Control Rules
You can modify existing rules to update their roles/IP addresses, or delete them when they are no longer
needed.
To modify a role-based access control rule:
1. Choose Device Settings > Security > Role Based Access Control.
2. Go to the IPv4 or IPv6 section.
3. Select the desired rule in the list.
Ensure the IPv4 or IPv6 checkbox has been selected, or you cannot select any rule.
4. Perform the desired action.
Make changes to the selected rule, and then click Save. For information on each field, see
Creating
Role Based Access Control Rules
(on page 168).
Click
to remove it.
To resort its order, click
or
.
5. Click
Save.
IPv4
rules:
Make sure you click the Save button in the IPv4 section
, or the changes made to IPv4
rules are not saved.
IPv6
rules:
Make sure you click the Save button in the IPv6 section
, or the changes made to IPv6
rules are not saved.