LEGRAND PDU User Manual Download Page 147

Page: 147 / 505

Legrand PDU User Guide 147



To restore automatic update, click

. Those new events that have not been listed yet

due to suspension will be displayed in the log now.

3. To go to other pages of the log, click the pagination bar at the bottom of the page.



When there are more than 5 pages and the page numbers listed does not show the desired one, click

to have the bar show the next or previous five page numbers, if available.

4. If wanted, you can resort the list by clicking the desired column header. See

Sorting a List

(on page 86).



To clear the diagnostic log:

1. On the top-right corner of the log, click

2. Click Clear Log on the confirmation message.

Summary of Contents for PDU

























































































































































































































































































































































































































































































































Search results

Summary of Contents for PDU

Reviews:

Related manuals for PDU

Brands by name

Popular brands

LEGRAND PDU, User Manual

Search results

Summary of Contents for PDU

Reviews:

Related manuals for PDU

Brands by name

Popular brands