Ju
ne
20
18
280 Legrand PDU User Guide
Environmental Sensor Package Information
Different from the "
show externalsensors
" commands, which show the reading, status and configuration
of an individual environmental sensor, the following command shows the information of all connected
environmental sensor packages, each of which may contain more than one sensor or actuator.
#
show peripheralDevicePackages
Information similar to the following is displayed. An environmental sensor package is a peripheral device
package.
Peripheral Device Package 1
Serial Number:
AEI7A00022
Package Type:
DPX-T1H1
Position:
Port
1
Package State:
operational
Firmware Version: Not available
Peripheral Device Package 2
Serial Number:
AEI7A00021
Package Type:
DPX-T3H1
Position:
Port
1
Package State:
operational
Firmware Version: Not available
Actuator Information
This command syntax shows an actuator's information.
#
show actuators <n>
To show detailed information, add the parameter "details" to the end of the command.
#
show actuators <n>
details
Variables:
<n> is one of the options:
all
, or a number.
Option
Description
all
Displays the information for all actuators.
Tip: You can also type the command without
adding this option "all" to get the same data.
A specific
actuator
number*
Displays the information for the specified actuator
only.
