Ju
ne
20
18
Legrand PDU User Guide 279
Environmental Sensor Information
This command syntax shows the environmental sensor's information.
#
show externalsensors <n>
To show detailed information, add the parameter "details" to the end of the command.
#
show externalsensors <n>
details
Variables:
<n> is one of the options:
all
, or a number.
Option
Description
all
Displays the information of all environmental
sensors.
Tip: You can also type the command without
adding this option "all" to get the same data.
A specific
environmental
sensor number*
Displays the information for the specified
environmental sensor only.
* The environmental sensor number is the ID number assigned to the sensor, which can be found on the
Peripherals page of the Legrand PDU web interface.
Displayed information:
Without the parameter "details," only the sensor ID, sensor type and reading are displayed.
Note: A state sensor displays the sensor state instead of the reading.
With the parameter "details," more information is displayed in addition to the ID number and sensor
reading, such as the serial number, sensor position, and X, Y, and Z coordinates.
Note: DPX sensor packages do not provide chain position information.