LeCroy Digital Oscilloscopes, Manual

Page: 153 / 213

²
0HDVXULQJ6NLOOV
Note: When “HDD” is selected,
a variety of new menu items
appear. They are: the total size
of the inserted PC Card hard
disk drive — in this case, 128
511 kB; the amount of space
free on the hard disk drive —
here, 127 194 kB; the name of
the HDD directory in which the
files will be stored — shown is
the default file
LECROY_1.DIR”, created by
the scope when a file is stored;
and the Auto-store menu,
whose description concludes
this tutorial. Each time a trace is
stored, the “Free” value is
updated. The scope has a pre-
defined naming convention for
the eight-character file names.
For manually stored waveform
files, the format is Stt.nnn —
where “tt” defines the trace
name of C1, C2, C3, C4, TA,
TB, TC, TD, and “nnn” denotes
an automatically assigned,
three-digit decimal sequence
number starting at 001.
67(3
The screen will then display:
Press the corresponding menu for “DO STORE” to
store the acquired signal on the hard disk drive.
A message confirming that this has been achieved — such as: “2
stored to SC2.001 on LECROY_1.DIR of HDD” — will be
displayed at the top of the screen.