Leader LT4610-SER01, Instruction Manual

Page: 85 / 272

10. GENLOCK MENU
64
10.2 Selecting the Genlock Format
When the genlock mode is set to GL FMT-MANUAL, to select the genlock format, follow the
procedure below. To select items use the , , , and keys.
The genlock formats are expressed in terms of the total number of lines, not the number of
effective lines.
１．ＧＥＮＬＯＣＫ ＮＴＳＣ

►＊ＮＴＳＣ ＢＢ
Procedure
GENLOCK → FORMAT
Parameters
NTSC:
NTSC BB / NTSC BB+REF / NTSC BB+ID / NTSC BB+REF+ID
PAL: PAL BB / PAL BB+REF
COMPONENT: 525/59.94I / 525/59.94P / 625/50I / 625/50P
1125:HD:
1125/60I / 1125/59.94I / 1125/50I / 1125/30P / 1125/29.97P /
1125/25P / 1125/24P / 1125/23.38P / 1125/24PsF / 1125/23.98PsF
750:HD: 750/60P / 750/59.94P / 750/50P / 750/30P / 750/29.97P / 750/25P /
750/24P / 750/23.98P
* REF represents the field reference pulse, and ID represents the field ID.
10.3 Adjusting the Timing
Under GENLOCK→TIMIN G, you can collectively adjust the timing of the output signals
(ANALOG BLACK, SDI, AES/EBU, SILENCE, WCLK) relative to the reference signal. (You can
also adjust them individually.)
This menu appears when the genlock mode is set to GL or GPS(SER01).
０．ＧＥＮＬＯＣＫ

ＴＩＭＩＮＧ
↵