Leader LT4610-SER01, Instruction Manual

Page: 132 / 272

13. AES/EBU MENU (SER23)
111
13.1.3 Setting the Level
To set the level of the selected channel, follow the procedure below.
４．ＡＥＳ／ＥＢＵ ＣＨ１ ＬＥＶＥＬ
－２０ ［ｄＢＦＳ］
Procedure
AES/EBU → AES/EBU → SETTING → CH1 / CH2 → LEVEL
Parameters
-60 to -20 to 0
13.1.4 Setting Clicks
You can insert click sounds into the selected channel. Follow the procedure below to set the
insertion interval to a value other than OFF.
This is invalid when LIPSYNC SDI1+AES on the ETC menu is set to ON.
４．ＡＥＳ／ＥＢＵ ＣＨ１ ＣＬＩＣＫ
►＊ＯＦＦ
Procedure
AES/EBU → AES/EBU → SETTING → CH1 / CH2 → CLICK
Parameters
OFF / 1sec / 2sec / 4sec
13.1.5 Settings Shared by Channels
You can link the channel 2 setting to the channel 1 setting by following the procedure below
to select ON. In this situation, channel 2 cannot be set.
４．ＣＨ２ ＥＱＵＡＬ ＴＯ ＣＨ１
■ＯＮ □ＯＦＦ
Procedure
AES/EBU → AES/EBU → SETTING → CH2 → EQUAL TO CH1
Parameters
ON / OFF