Leader LT4610-SER01, Instruction Manual

Page: 120 / 272

12. SDI MENU (SER22)
99
12.9.6 Setting the Logo Level
To set the logo intensity level, follow the procedure below.
Logos are made of 4-level monochrome data (LEVEL0, LEVEL1, LEVEL2, LEVEL3). You can
set the display intensity level for each level.
When LOGO BACKGND is set to ON, LEVEL0 is invalid.
５．ＬＯＧＯ ＬＥＶＥＬ０
１００ｈ （ ０％） ５．ＬＯＧＯ ＬＥＶＥＬ１
５９０ｈ （ ３３％）
５．ＬＯＧＯ ＬＥＶＥＬ２
Ａ２０ｈ （ ６６％） ５．ＬＯＧＯ ＬＥＶＥＬ３
ＥＢ０ｈ （１００％）
Procedure (SDI OUTPUT option)
SDI → SDI1 → VIDEO → LOGO → LEVEL → LEVEL0 / LE VEL1 / LEVEL2 / LEVEL3
Procedure (12G option)
12G OPTION → SDI 1 → VIDEO → LOGO → LEVEL → LEVEL0 / LEVEL1 / LEVEL2 / LEVEL3
Parameters
100h(0%) to EB0h(100%)
(LEVEL0 default value: 100h(0%), LEVEL1 default value: 590h(33%),
LEVEL2 default value: A20h(66%), LEVEL3 default value: EB0h(100%))
12.9.7 Setting the Logo Transparency
To select whether to make the area set to LEVEL0 transparent, follow the procedure below.
４．ＬＯＧＯ ＢＡＣＫＧＮＤ
□ＯＮ ■ＯＦＦ
Procedure (SDI OUTPUT option)
SDI → SDI1 → VIDEO → LOGO → BACKGND
Procedure (12G option)
12G OPTI
ON → SDI 1 → VIDEO → LOGO → BACKGND
Parameters
ON:
The area is made transparent.
OFF: The area is not made transparent.
LOGO BACKGND = ON LOGO BACKGND = OFF