Leader LT4610-SER01, Instruction Manual

Page: 139 / 272

16. GPS OPTION MENU (SER01)
118
16.1.3 Adjusting the Time Code Output Timing (Bit)
To adjust the time code outputs (LTC1 to LTC3) at the bit level, follow the procedure below.
To the right of BIT, the value obtained by converting bits into time is displayed.
３．ＬＴＣ ＴＩＭＩＮＧ ＢＩＴ
０ ＢＩＴ ０．０００ｍｓ
Procedure
GPS OPTION → LTC → TIMING → BIT
Parameters
-39 to 0 to 39
16.1.4 Adjusting the LTC2 Offset
To adjust the LTC2 offset relative to LTC1, follow the procedure below.
２．ＬＴＣ２ ＯＦＦＳＥＴ
＋００：００：００ ［ＨＨ：ＭＭ：ＳＳ］
Procedure
GPS OPTI
ON → LTC → LTC2 OFFSET
Parameters
-23:59:59 to +00:00:00 to +23:59:59
16.1.5 Adjusting the LTC3 Offset
To adjust the LTC3 offset relative to LTC1, follow the procedure below.
２．ＬＴＣ３ ＯＦＦＳＥＴ
＋００：００：００ ［ＨＨ：ＭＭ：ＳＳ］
Procedure
GPS OPTION → LTC → LTC3 OFFSET
Parameters
-23:59:59 to +00:00:00 to +23:59:59